Essential Advantages:

Bandmotion feeders operate with two pneumatic cylinders and four very solid linear precision guides to lift and guide the upper roller during pilot release. This technology guarantees a stable, torsion-free and balanced press-force between the lower and upper rollers.

Broad and heavy-duty feeders have the linear guides and pressure cylinders arranged in such a way, that common deflection and twisting forces will be evenly balanced in the pressing unit.

With the two-cylinder technology, the total air volume is distributed evenly into two individual cylinders with smaller air capacity. Thus, each cylinder can be ventilated and de-ventilated quicker and as a result, the system can achieve very high pilot release rates.

This technology eliminates any rocker systems and the rollers can be exchanged in a short time and without disassembling the feeder.

Due to this clever two-cylinder design, the travelling distance during pilot release can be adjusted upwards and downwards. This is a great advantage, especially when feeding very soft materials into the press or to avoid damages on hard coated rollers while operating the feeder without materials in-between the rollers.

The Bandmotion roller system is a clever 3-piece design and the roller ends can be detached from the center part. This allows a fast and economic replacement of worn parts only, instead of replacing the whole roller.

Servo Double-Gripper Feeder BMZ 90-160 LD

• Double-Gripper feeder to transport strip material up to a cross-section of 2x 50mm2
• Two individually programmable feeding grippers
• Driven by 2 highly dynamic linear motor
• Allows simultaneous feeding of two different wires or strips with various lengths
• No time loss of retracting grippers during continuous feeding
• Outstanding accuracy and feed positioning (+/-0.010)
• Blazing fast pneumatic pilot release for all 3 grippers
• Very compact and user-friendly design
• Easy programmable 2-axis CNC control with with LCD display
• Easy integration to any press system via 24V I/O unit with 18 inputs/11 outputs
• Strip material can be transport in push or pull mode
• Integrated safety impulse lock (IPS1) according PLe/SIL3 standards
• Data management on FLASH memory, stores up to 200 user programs, data backup on SD card

Servo Gripper Feeder BMZ 40-30 L

• Extremely compact gripper feeder to transport strip material up to a cross-section of 50mm2
• Very small feeder, can be attached directly to or into press tool (134x202mm LxW)
• Driven by highly dynamic linear motor
• Outstanding accuracy and feed positioning (+-0.010)
• Blazing fast pneumatic pilot release
• Strip end sensor is incorporated in adjustable inlet roller guide
• Strip material can be transport in push or pull mode
• Control unit is available as cabinet installation cassette or as standalone table-top housing
• Data management on FLASH memory, stores up to 200 user programs, data backup on SD card
• Easy integration to any press system via 24V I/O unit with 18 inputs/11 outputs

Servo Roll Feeder BMH 120-220 SG

• Roll feeder to transport strip material up to a cross-section of 100mm2
• Both rollers, lower and upper are driven
• Servo motor is coupled directly with lower roller to achieve maximum accuracy
• Play free direct coupling between lower and upper rollers
• Also available as segment roller
• Segments can be exchanged fast and easy, without dismantling the feeder
• Pilot release opening distances can be adjusted
• Strip material can be transport in push or pull mode